LabVIEW is a powerful graphical development environment, for signal acquisition, measurement analysis, and data presentation. LabVIEW also provides the flexibility of a programming language without the complexity of traditional development tools. LabVIEW is an open environment designed to make interfacing with any measurement hardware simple. With interactive assistants, code generation, and connectivity to thousands of devices, LabVIEW makes gathering data as simple as possible. LabVIEW has more than 500 built-in functions designed specifically for extracting useful information from any set of acquired data and for analyzing measurements and processing signals. LabVIEW also provides tools for data visualization, user interface design, Web publishing, report generation, data management, and software connectivity. For more info on the LabVIEW product see the National Instruments web site.

As a current subscriber to the National Instruments Academic Site License, UAB receives:

  • Unlimited installations of all NI software included in the NI Academic Site License for teaching or research across campus (see below for products included)
  • Unlimited one-on-one technical support by NI applications engineers via phone/e-mail [ni.com/support]
  • Automatic semiannual updates with new and upgraded software (May and November)
  • The following products are included unless noted otherwise:
  1. Control Design, Simulation, and Mechatronics
  2. LabVIEW
  3. Control Design Toolkit
  4. Simulation Module
  5. System Identification Toolkit
  6. State Diagram Toolkit
  7. LabVIEW FPGA Module
  8. LabVIEW Real-Time Module
  9. NI SoftMotion Development Module
  10. LabVIEW PDA Module
  11. Signal and Image Processing
  12. LabVIEW
  13. Digital Filter Design Toolkit
  14. LabVIEW DSP Module
  15. Adv. Signal Processing Toolkit
  16. Sound and Vibration Toolkit
  17. Modulation Toolkit
  18. Vision Development Module
  19. LabVIEW FPGA Module
  20. Spectral Measurements Toolkit
  21. Measurements and Instrumentation
  22. LabVIEW
  23. SignalExpress
  24. DIAdem
  25. LabVIEW PDA Module
  26. Sound and Vibration Toolkit
  27. Circuit Design and Simulation (This software is not included in the UAB site license.)
  28. RF and Wireless Communications
  29. LabVIEW
  30. Modulation Toolkit
  31. Spectral Measurements Toolkit
  32. Advanced Signal Processing Toolkit
  33. Embedded Systems Design
  34. LabVIEW
  35. LabVIEW Real-Time Module
  36. LabVIEW FPGA Module
  37. LabVIEW PDA Module

The media can be ordered through AskIT at 205-996-5555 or via e-mail (askit@uab.edu), but is not available for download.  Documentation (guides and manuals) is available on the LabVIEW web site - DOCUMENTATION.

UAB Telecommunications is implementing our new voice mail platform on November 15th, 2012.

Your new voice mail box has been created on the new system and we need you to setup your new voice mail box prior to the cutover on November 15th.

Please go to our IT Telecommunications website for complete directions in setting up your new voice mail box.

You will be able to access archived voice mail messages on your old voice mail until December 15th, 2012.  To access archived messages dial (6-6001) and follow the prompts.

For any questions or concerns please contact our help desk at  Repaircomm@uab.edu, or call our Telecom help desk at 4-7777 with any issues or questions.

*Please note that UAB Health System Cisco VoIP phones will not be affected by the cutover to the new voice mail system.

 

Each ethernet device is assigned a unique hardware address by the manufacturer. Manufacturers are each assigned a range of addresses that they may use in their manufacturing, so that it is not possible for two vendors to assign the same address. These hardware addresses are called MAC Addresses.

SOLUTION:

You can search by MAC number to find out what vendor's hardware you are looking for. An interactive database is available from the IEEE for this purpose. You can also check Cavebear's list of Vendor Codes

 

Published in FAQ - Infrastructure

 

If you experience any issues with PGP, please report them to the help desk, AskIT, by email at AskIT@uab.edu" target="_blank">AskIT@uab.edu, or by phone at 205-996-5555.  Please be sure to provide the following information:

  • Issue/symptoms
  • Error messages
  • Computer make and model
  • Internet connection type
  • PGP installer version
  • Estimated time of occurrence (if possible)

Common Solutions to Installation Issues

  1. Verify that you are an administrator of the system on which you are attempting to install PGP. 
  2. Open your web browser and ensure that you have Internet connectivity by opening a website.
  3. Be sure that you have a current installation package for PGP Desktop.  Visit www.uab.edu/it/software for the latest installation files.
  4. Ensure that you are using your BlazerID and strong password for the PGP Enrollment credentials.

Common Solutions to Password Related Issues

  1. Verify that Caps Lock is not on while authenticating.
  2. If you recently changed your account password, you may have to provide the old password until you log in to the system with your new password.
  3. If the previously mentioned steps do not resolve your issue, you should call the AskIT Help Desk to request a PGP recovery token for the system or portable device.  A recovery token is a one-time password that will allow you to bypass PGP, but it will not bypass the operating system password; you are still required to log in.

Common Solutions to Boot/Startup Related Issues

  1. Ensure that a keyboard is connected to the system.  Systems such as tablets without physical keyboards will not be able to authenticate on the PGP boot screen.
  2. Remove any CDs, DVDs or USB drives from the system.  Many of these devices have features that allow them to start before the system hard drive.
  3. Does the system have multiple operating systems or Dell Media Direct?  If so, then you will need to contact your support personnel to assist you with the recovery of your hard drive.  Please note that PGP should never be installed on systems with multiple operating systems, as it will render the system inoperable.
  4. See the PGP Recovery documentation for further support.

 

UAB has contracted with DriveSavers to provide data recovery services for the UAB
community. DriveSavers is the only data recovery company in the industry that undergoes
annual SAS 70 Type II Audit Reports and is HIPAA compliant, offering the highest level of data
security available. DriveSavers is also compliant with FAR 52.224-2 (Privacy Act), ISO 17799,
Sarbanes-Oxley Act of 2002 (SOX), the US government Data-At-Rest (DAR) mandate, the
Gramm-Leach-Bliley Act (GLBA) and the new regulation by National Institute of Standards and
Technology, NIST SP 800.34 (Rev. 1).


To view DriveSavers certifications, and learn more about Data Recovery Industry standards,
visit: http://www.drivesaversdatarecovery.com/proof


Order Data Recovery Services click & follow instructions.

 If you are dialing into the system from a different number,(other than your mailbox number), press the "*" key next and you will be prompted to enter your seven digit mailbox number followed by your passcode. This allows the server to match your passcode to the correct mailbox number.

Published in FAQ - Infrastructure

Data Custodians must:

  • Designate appropriate individuals with system administration responsibilities, ensuring that their role in securing the system is defined in their job description, and that they are trained in administration and security of the system.
  • Ensure adherence to UAB guidelines and procedures for protecting data as found in IT Security Practices.
  • Ensure compliance with all stipulations of this and other UAB policies and other legal and regulatory requirements including those related to dissemination of data (UAB's Information Disclosure and Confidentiality Policy) and disposal of computer equipment and systems (UAB's Equipment Accounting standards, and "Guidelines for secure disposal of media containing sensitive information").
  • Ensure that risk assessments are performed (including disaster recovery plans, backup and contingency plans) as required by HIPAA for all PHI. Risk assessment is recommended for all other sensitive or mission critical data.
  • Ensure that documentation of data resources created, used, or stored within their area of control is maintained.
  • Ensure that systems containing sensitive information are physically secured from unauthorized access.
  • Ensure that the department/unit follows procedures to mitigate all identified compromises or identified data security threats.
  • Ensure that actual or suspected data security breaches, especially when involving sensitive data, are reported to the Data Security Office immediately and that any recommended corrective action is implemented.
  • Ensure that non-UAB entities or contracted third party vendors handle data in accordance with UAB policies and procedures.

Collaboration resources are tools and technologies that enable members of the UAB community to transparently engage with partners across campus and around the globe.

Available tools include wikis, mailing lists, blogs, content management, software development and other tools to help maintain a presence on the web.

To facilitate interaction with peers at other institutions, we interface to a number of regional and national initiatives including:

Page 2 of 3