Materials Processing and Applications Development (MPAD) Center

Publications

Book
U.K.Vaidya, Composites for Automotive, Mass Transit and Heavy Truck. DesTech Publications, August 2010.

Book Chapters

U.K.Vaidya, Impact Response of Laminated and Sandwich Composites., Chapter 4, pp. 97-192, in Impact to Composite Structures, Serge Abrate, CISM Udine, Italy, Publisher – SpringerWien New York, 2011.

U.K.Vaidya and Lakshya Deka., Single and Multisite Impact Response of S2-glass/epoxy balsa wood core sandwich composites., pp. 541-570., in Major Accomplishments in Composite Materials and Sandwich Structures., An Anthology of ONR Sponsored Research Daniel, I. M.; Gdoutos, E.E.; Rajapakse, Yapa D.S. (Eds.) 2010, XVIII, 818 p. Springer Publishers.

 Eric Anderson, Selvum Pillay, Basir Shafiq and Uday Vaidya., Effect of pre-stressing on impact damage response of composite structures., in Dynamic failure of composite and sandwich structures, Ed. S.Abrate, B. Castanie and Y.D.S. Rajapakse, Springer, September 2012.

Richard C. Petersen and Uday K. Vaidya., Free-Radical Reactive Secondary Sequence Chain-Lengthening Lipid Pathology Micromechanics and electron interactions for advanced biomedical research., Chapter 16, pp 233-284, Ed. Richard c. Petersen, in Micromechanics and Electron Interactions., Fiber Reinforced Composite Medical/Dental Devices and Advancements in Cell Biology/Pathology.


Representative Publications in Journals and Conferences

John Smith and Uday Vaidya, Processing Optimization of Deformed Plain Woven Thermoplastic Composites., Applied Composite Materials, ACMA-D-13-00083R1, in-print, June 2013.

John Smith, John Johnstone and Uday Vaidya., Analytical modeling of progressive forming of thick section thermoplastic composites., International Journal of Forming, in-print, June 2013.

Eric Kerr-Anderson, Benjamin Geiger-Willis, Selvum Pillay, and Uday Vaidya., Design and Development of a Test Fixture and Method for Investigation of Impact During Pre-Stressed Compression, ASTM Journal of Testing and Evaluation, in-print, June 2013.

K. Balaji Thattaiparthasarthy, S. Pillay and Uday K. Vaidya., Processing and  characterization of continuous fiber reinforcements co-molded with long fiber reinforced thermoplastics, Polymers and Polymer Composites, in-print, April 2013.

Dhruv Bansal, Selvum Pillay and Uday Vaidya Processing and characterization of nanographene platelets modified phenolic resin as a precursor to carbon/ carbon composites (Part I), Journal of Reinforced Plastics and Composites (accepted, in-print, Feb 2013, paper ID- 479418).

Dhruv Bansal, S. Pillay and U.K.Vaidya., Processing and characterization of nanographene platelets modified phenolic resin as precursor to carbon/carbon composites (Part-II)" Manuscript ID JRP-12-0477.R2, Journal of Reinforced Plastics and Composites, (In-print, March 2013).

Dhruv Bansal, S. Pillay and U.K.Vaidya., “Nanographene-reinforced carbon/carbon composites”, Final version published online: 4-Feb-2013, Carbon (2013), pp. 233-244 DOI information: 10.1016/j.carbon.2012.12.032.

Rahman et al.,  Effects of amino-functionalized MWCNTs on ballistic impact performance of E-glass/epoxy composites using a spherical projectile, International Journal of Impact Engineering, 57 (2013) 108-118.

Williams, T.; Hosur, M.; Vaidya, U.; Jeelani, S., Effect of alkali treatment on physical properties of bio-based composites, Polymers and Polymer Composites, V 21, Issue 1, pp 9-20, 2013.

U.K. Vaidya, Selvum Pillay, K. Balaji Thattai and Haibin Ning., Advanced Reinforced Thermoplastic Composites for Mass Transit and Heavy Truck Applications, Int. J. Vehicle Structures & Systems, 4(3), 100-103, 2012.

Ochoa-Putman, Carol and Vaidya, Uday K., Mechanisms of interfacial adhesion in metal-polymer composites - Effect of chemical treatment, Composites Part A: Applied Science and Manufacturing, v 42, n 8, p 906-915 (2011).

Ochoa Putnam, Carol and Vaidya U.K., Interfacial shear strength in a metal-thermoplastic composite, Polymers and Polymer Composites, ISSN: 0967-3911, Vol: 18, Issue: 7, pp. 369-381 (2010).

H. Ning, G.M. Janowski and U.K.Vaidya., Processing and nonisothermal crystallization kinetics of carbon/PPS in single diaphragm forming, Journal of Composite Materials, Vol. 44, No. 8 (2010).

A. Goel, K.K. Chawla, U.K. Vaidya, N. Chawla, M. Koopman., Characterization of fatigue behavior of long fiber reinforced thermoplastic (LFT) composites., Materials Characterization, pp. 537-544, 60 (2009).

U.K.Vaidya., New Lightweight Materials and Processes: Advanced Lightweight Vehicle Components and Materials, The 10th Annual Light Armored Vehicles (LAV) & Stryker Summit, November 14-16, 2011, Institute for Defense and Government Advancement (IDGA); Invited Presentation.

Carlisle, K; Etienne, O.; Brito, V, Gladysz, G, Warth, P, Pillay, S and Vaidya, U., Energy absorption of novel macro-porous three-phase syntactic foams. Materials Science and Technology Conference and Exhibition 2010, MS and T'10, v 3, p 2032-2041, 2010, Materials Science and Technology Conference and Exhibition 2010, MS and T'10.

J. Smith and U.K.Vaidya., Progressive forming of thermoplastic composite laminates., SPE Automotive Composites Conference and Exposition, Sep 15-16, 2010, CD-ROM proceedings.

Vaidya, Uday K., Thattai, K. Balaji; Pillay, S.; Ning, H.; Grow, Dana T.,  Recycled long fiber thermoplastic composites for transportation applications., International SAMPE Symposium and Exhibition (Proceedings), 2010, SAMPE 2010 Conference and Exhibition "New Materials and Processes for a New Economy"., CD-ROM proceedings.

U.K.Vaidya, Weight Reducing Technology for Military Vehicles: New Lightweight Materials and Processes: Advanced Lightweight Vehicle Components and Materials, Military Vehicles Canada, June 27-29, 2011, Ottawa, Ontario, Canada, Institute for Defense and Government Advancement (IDGA); Invited Presentation.

U.K. Vaidya, B. Thattaiparthasarthy, S. Pillay, and H. Ning., Colored Inorganic Pigmented Long Fiber Thermoplastics International SAMPE Symposium and  Exhibition (Proceedings), 2010, SAMPE 2010 Conference and Exhibition "New Materials and Processes for a New Economy". CD-ROM proceedings.

U.K.Vaidya, E. Anderson, S. Pillay., Effect of Pre-Stressing and Curvature on E-Glass/Vinyl Ester Composites.,  Proceedings Mechanics of Composites Materials, Office of Naval Research, Ed. Y.D.S.Rajapakse, College Park, MD, September 2010.

A. Vaidya,  N. Uddin, and  U. Vaidya., Structural Characterization of Composite Structural Insulated Panels for Exterior Wall Applications, ASCE Journal of Composites for Construction 14, 464-469 (2010)

U.K.Vaidya and J. Barry Andrews., Advanced Composites:  Applications & Opportunities for Lightweighting Military Vehicles, LAV and Striker Summit., Washington, DC Nov 15-18, 2010, Institute for Defense and Government Advancement (IDGA), Invited Presentation.

Vaidya, U.K., Pillay, S., Ulven, C.A., Grow, D. and Mathew, B. Impact and Post Impact Vibration Response of Protective Metal Foam Composite Sandwich Plates. Materials Science and Engineering A 428, pp 59–66, (2006)

Pillay, S., Vaidya, U.K., Janowski, G.M., Liquid Molding of Carbon Fabric-reinforced Nylon Matrix Composite Laminates, Journal of Thermoplastic Composite Materials, Vol. 18, No. 6, 509-527 (2005)

Lina-Herrera Estrada, Carol Ochoa, Saeed Huda, Haibin Ning, Selvum Pillay and Uday K. Vaidya, Banana fiber composites, GPEC 2008, Orlando, Fl

Selvum Pillay, Gregg Janowski and Uday K. Vaidya, The durability of liquid molded carbon nylon 6 composite laminates, exposed to an aggressive moisture environment, International Conference on Composite Materials (ICCM-16), Kyoto, Japan, July8-13, 2007 (CD-ROM Proceedings).

S. Vaddi, S. Pillay and U.K.Vaidya., Fire Response of Composite Laminates. COMPOSITES & POLYCON 2007 - October 17-19, 2006 - Tampa, Florida (CD-ROM Proceedings).

Haibin Ning, Selvum Pillay, and Uday K. Vaidya, Design and development of thermoplastic composite roof door for mass transit, Materials and Design, Volume 30, Issue 4, April 2009, Page 983-991.

U.K.Vaidya, Balaji, T, S. Pillay, H. Ning., Colored Inorganic Pigmented Long Fiber Reinforced Thermoplastics., SAMPE Seattle, May 2010, CD-ROM Proceedings.

Haibin Ning, Gregg M. Janowski, Uday K. Vaidya, and George Husman, Thermoplastic Sandwich Structure Design and Manufacturing for the Body Panel of Mass Transit, Composite Structures, 80 (1), Sept 2007, Page 82-91.

Haibin Ning, Uday K. Vaidya, Gregg M. Janowski, and George Husman, Design, Manufacture and Analysis of a Thermoplastic Composite Frame Structure for Mass Transit, Composite Structures, 80 (1), Sept 2007, Page 105-116.

Rheological characterization of long fiber thermoplastics - Effect of temperature, fiber length and weight fraction. K. Balaji Thattaiparthasarathy, Selvum Pillay, and Uday K. Vaidya. Composites Part A: Applied Science and Manufacturing, v 40, n 10, p 1515-1523, October 2009.

Process simulation, design and manufacturing of a long fiber thermoplastic composite for mass transit application. K. Balaji Thattaiparthasarathy, Selvum Pillay, Haibin Ning, and Uday K Vaidya. Composites Part A: Applied Science and Manufacturing, v 39, n 9, p 1512-1521, September 2008.

The process and microstructure modeling of long-fiber thermoplastic composites. Uday K. Vaidya, Krishan K. Chawla, K. Balaji Thattaiparthasarathy, and A Goel. Journal of Materials, v 60, n 4, p 43-49, April 2008.

A. Goel, K.K. Chawla, U.K. Vaidya, N. Chawla, M. Koopman., Characterization of fatigue behavior of long fiber reinforced thermoplastic (LFT) composites., Materials Characterization, pp. 537-544, 60 (2009).

L.J. Deka, S.D. Bartus, U.K. Vaidya., Multi-site impact response of S2-glass/epoxy composite laminates., Composites Science and Technology, Volume 69, Issue 6, May 2009, Pages 725-735.

A. Goel, K.K. Chawla, U.K. Vaidya, M. Koopman, and D.R. Dean. Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites. Journal of Materials Science, 2008. 43: p. 4423-4432.

Deka, L.J.; Bartus, S.D.; Vaidya, U.K., Damage evolution and energy absorption of E-glass/polypropylene laminates subjected to ballistic impact., Journal of Materials Science, v 43, n 13, p 4399-4410, July 2008.

K. Balaji Thattaiparthasarathy, S. Pillay, H. Ning, U.K. Vaidya., Process simulation, design and manufacturing of a long fiber thermoplastic composite for mass transit application., Composites Part A: Applied Science and Manufacturing, Volume 39, Issue 9, September 2008, Pages 1512-1521.

Vaidya, U.K.; Chawla, K.K., Processing of fibre reinforced thermoplastic composites., International Materials Reviews, v 53, n 4, p 185-218, July 2008.

Haibin Ning, Selvum Pillay, Uday K. Vaidya.,  Design and development of thermoplastic composite roof door for mass transit bus, Materials & Design, Volume 30, Issue 4, April 2009, Pages 983-991.

Goel, A., Chawla, K.K., Vaidya, U.K., Chawla, N., Koopman, M., Two-dimensional microstructure based modelling of Young's modulus of long fibre thermoplastic composite.,
Materials Science and Technology, v 24, n 7, p 864-869, July 2008.

C.A. Ulven, U.K. Vaidya., Impact response of fire damaged polymer-based composite materials., Composites: Part B 39 (2008) 92–107.

U.K. Vaidya, K.K. Chawla, K. Balaji Thattaiparthasarthy, and A. Goel., The Process and Microstructure Modeling of Long-Fiber Thermoplastic Composites., Journal of Materials., April 2008, pp. 43-49.

Uday K. Vaidya, Juan C. Serrano, Alejandro Villalobos, James Sands, James Garner.,Design and analysis of a long fiber thermoplastic composite tailcone for a tank gun training round., Materials and Design 29 (2008) 305–318.

A.S. Vaidya, U.K. Vaidya, N. Uddin., Impact response of three-dimensional multifunctional sandwich composite., Materials Science and Engineering A 472 (2008) 52–58.

Bartus S and Vaidya, U.K., A review: Impact damage of composite materials., Journal of Advanced Materials, v 39, n 3, July, 2007, p 3-21.

Kulkarni, Rahul R.; Chawla, Krishan K.; Vaidya, Uday K.; Sands, James M., Thermal stresses in aluminum 6061 and nylon 66 long fiber thermoplastic (LFT) composite joint in a tailcone., Journal of Materials Science, v 42, n 17, August, 2007, p 7389-7396.

Haibin Ning, Gregg M. Janowski, Uday K. Vaidya, and George Husman., Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle, Composite Structures, 80 (2007), pp.82-91.

John J. La Scala, Chad A. Ulven, Joshua A. Orlicki, Rahul Jain, Giuseppe R. Palmese, Uday K. Vaidya and James M. Sands, “Emission modeling of styrene from vinyl ester resins”, Clean Technologies and Environmental Policy Journal,  Published online : 1st November 2006, Springer Publishers.

Rahul Jain, Uday Vaidya and Anwarul Haque., Processing and characterization of carbon-carbon nanofiber composites Volume 15, Advanced Composite Materials Journal, Number 2 / July, 2006, pp. 211-241.

J.C.Serrano-Perez, U.K.Vaidya and N.Uddin., Low velocity impact response of autoclaved aerated concrete / CFRP sandwich plates., Composite Structures, 80 (2007), pp. 621-630.

N.Uddin, F. Fouad, U.K.Vaidya, A.K.Khotpal and J.C.Serrano-Perez., Structural Behavior of Fiber-Reinforced Polymer-Autoclaved Aerated Concrete Panels., ACI Structural Journal., Vol. 104, No. 6, Nov-Dec 2007, pp. 722-730.

C.A. Ulven and U.K. Vaidya., Post-fire low velocity impact response of marine grade sandwich composites, Composites Part A: Applied Science and Manufacturing, Volume 37, Issue 7, Pages 997-1004 July 2006.

Haibin Ning, Uday Vaidya, Gregg M. Janowski and George Husman., Design, manufacture and analysis of a thermoplastic composite frame structure for mass transit, Composite Structures, 80 (2007), 105-116.

R. Sriram, U.K.Vaidya and J.H.Kim., Blast Impact of Aluminum Foam Sandwich Composites, Journal of Materials Science, Volume 41, No. 13, July 2006, pp.4023-4040.

N.Uddin, U.K.Vaidya, M.S.Shohel and J.C. Serrano-Perez., Vacuum-Assisted Resin Transfer Molding: An alternative method for retrofitting concrete using fiber composites., Concrete International., pp. 53-56, Vol. 28, No. 11, November 2006.

S.D Bartus, C.A.Ulven, and U.K.Vaidya., Design and Development of Long Fiber Thermoplastic Bus Seat, Journal of Thermoplastic Composite Materials, Vo. 9, No. 2, pp. 131-154, March 2006.

C.A. Ulven and U.K. Vaidya., Post-fire low velocity impact response of marine grade sandwich composites  • Composites Part A: Applied Science and Manufacturing, Volume 37, Issue 7, Pages 997-1004 July 2006.

N. Uddin, F. Fouad, U.K.Vaidya, A. Khotpal, J.C.Serrano-Perez, Structural Characterization of Fiber Reinforced Polymer (FRP)-Autoclave Aerated Concrete (AAC) Panels, Journal of Reinforced Plastics & Composites, Vol. 25, No. 9, pp.981-1000, 2006.

Uday K. Vaidya, Selvum Pillay, Shane Bartus, Chad A. Ulven, Dana T. Grow, Biju Mathew; Impact and post-impact vibration response of protective metal foam composite sandwich plates, Materials Science & Engineering A, Available online 19 June 2006.

S. Pillay, U.K.Vaidya and G.M.Janowski., Liquid Molding of Carbon Fabric Reinforced Nylon Matrix Composite Laminates, Journal of Thermoplastic Composites, Volume 18, No.6, pp. 509-528, November 2005.

U.K.Vaidya, A.R.S. Gautam, M.V.Hosur and P.K.Dutta., Experimental–Numerical Studies of Transverse Impact Response of Adhesively Bonded Lap Joints In Composite Structures, International Journal of Adhesion and Adhesives, Volume 26, Issue 3, pp. 184-198, June 2005.

J.C. Serrano-Perez and U.K.Vaidya, Modeling and Implementation of VARTM for Civil Engineering Applications, SAMPE Journal, pp.5-22, January 2005.

N.Uddin, M. Shohel, U.K.Vaidya, and J.C. Serrano-Perez., In-Plane Debond Response of Concrete Composites, SAMPE Journal of Advanced Materials, Vol. 37, No.2, pp. 3-15, April 2005.

M.V. Hosur, S.M. Waliul Islam, U.K. Vaidya, A. Kumar, P.K. Dutta and S. Jeelani., Dynamic Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room and Elevated Temperatures, Composite Structures, Volume 70, Issue 3, pp. 295-307, September 2005.

Uday K. Vaidya, Francis Samalot, Selvum Pillay, Gregg M. Janowski, George Husman, and Klaus Gleich., Design and Manufacturing of Woven Reinforced Glass/Polypropylene Composites for Mass Transit Floor Structure, Journal of Composite Materials, Vol. 38, No. 21, pp.1949-1972, 2004.

M.V.Hosur, U.K.Vaidya, C.A. Ulven and S. Jeelani., Performance of Stitched/Unstitched Woven Carbon/Epoxy Composites Under High Velocity Impact Loading., Composite Structures, Volume 64, Issues 3-4, pp. 455-466, June 2004.

S.D. Bartus and U.K. Vaidya., Performance Of Long Fiber Reinforced Thermoplastics Subjected to Transverse Intermediate Velocity Blunt Object Impact, Composite Structures, Volume 67, Issue 3, pp. 263-277, March 2005.

Uddin, N., U.K Vaidya, M. Shohel, and J.C. Serrano-Perez., Cost-effective strengthening of bridge girder using vacuum assisted resin transfer molding, Journal of Advanced Composite Materials, Volume 13, Number 3-4, 2004, pp. 214-235.

U.K.Vaidya, C. Ulven, S. Pillay and H. Rick., Impact Damage of Partially Foam-Filled Co-Injected Honeycomb Core Sandwich Composites, Journal of Composite Materials, Vol. 37, No. 7, pp.611-626, 2003.

M. V. Hosur, J. Alexander, S. Jeelani,  U. K. Vaidya, A. Mayer., High Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Composites, Journal of Reinforced Plastics and Composites, Volume 22, Number 3, pp. 271-296, 2003.

M. V. Hosur, M. Adya, J. Alexander, U. K. Vaidya, A. Mayer, S. Jeelani., Studies on Impact damage Resistance of affordable Stitched woven Carbon/Epoxy Composite Laminates, Journal of Reinforced Plastics and Composites, Volume 22, Issue 10, pp. 927-952, July 2003.

C. A.Ulven, U.K.Vaidya, and M.V.Hosur., Effect of Projectile Shape During Ballistic Perforation of VARTM Carbon/Epoxy Composite Panels, Composite Structures, Volume 61, Number 1-2, pp.143-150, 2003.

U.K.Vaidya, C. Ulven, M. V. Hosur, J. Alexander, L. Liudahl., Intermediate Velocity Impact Response of Carbon/Epoxy Composites with Polycarbonate Facing, Polymers and Polymer Composites, Volume 11, Number 6, pp. 421-432, 2003.

Hosur M.V, Alexander J, Vaidya U.K, Jeelani S. and Mayer A., High Strain Rate Compression Characterization of Affordable Woven Carbon/Epoxy Composites Under Off-Axis Loading, Polymers and Polymer Composites, Volume 11, Issue 7, pp. 527-539, 2003.

H. Barbulescu, D.B Marghitu, U.K. Vaidya., Spatial Impact of a Slender Beam, Journal of Engineering Materials and Technology, Volume 125, Issue 4, pp. 368-371, October 2003.

U.K. Vaidya,  N. Jadhav, M.V.Hosur, J. Gillespie and B.K.Fink., Assessment of Flow and Cure Monitoring using Direct Current and Alternating Sensing In Vacuum Assisted Resin Infusion Molding Process,  Smart Materials and Structures Journal, 9, pp. 727-736, 2000.

M. Motuku, G. Janowski, U.K.Vaidya, M.V.Hosur, H. Mahfuz and S. Jeelani., Damage Evolution in Low Velocity Impacted Unreinforced Vinyl Ester 411-350 and C50 Resin Systems, Polymer Composites, Number 6, Volume 21, pp.878-899 Dec 2000.

M.Motuku, G. M. Janowski, U. K. Vaidya, H. Mahfuz and S. Jeelani., Low Velocity Impact Characterization of Unreinforced Vinyl Ester 350 and C50 Resin Systems used in Low Cost Resin Transfer Liquid Molding, Polymers and Polymer Composites, Volume 7, Number 6, pp. 383-406, 1999.

M. Motuku, U.K.Vaidya and G. M. Janowski., Parametric Studies of Self-Repairing Approaches for Resin Infused Composites Subjected to Low Velocity Impact, Smart Materials and Structures Journal, 8, pp. 623-638, 1999.

U.K. Vaidya, M.V. Kamath, M.V. Hosur, H. Mahfuz, and S. Jeelani., Manufacturing and Low Velocity Impact Response of Sandwich Composites With Hollow and Foam Filled Z-Pin Reinforced Core, Journal of Composites Technology and Research, Volume 21, Number 2, pp. 84-97, April 1999.

A. Palazatto, L.N.B.Gummadi, U.K. Vaidya and E. Herup., Low Velocity Impact Damage Characteristics of Z- Fiber Reinforced Sandwich Panels - An Experimental Study, Composite Structures, Volume 43, Issue 4, pp. 275-288, Feb 1999.

U.K.Vaidya  and P.K.Raju., Acousto-Ultrasonics Characterization of Carbon-Carbon Composites at Different Processing Stages, Polymer Composites, pp.863-880, June 1995.

P.K.Raju and U.K.Vaidya., Nondestructive Evaluation of Composites using the Acoustic Impact Technique., Second Symposium on Cyclic Deformation, Fracture and Nondestructive Evaluation of Advanced Materials, American Society for Testing Materials, Special Technical Publication, ASTM STP 1184, Ed. M.R.Mitchell and O.Buck, pp. 376-391, Oct. 1994.

U.K.Vaidya and P.K.Raju., Monitoring Processing Stages of Carbon-Carbon (C/C) Composites using Vibration Based  Nondestructive Evaluation (NDE), Materials Evaluation, pp. 682-688, June 1994.

P.K.Raju, J. Patel and U.K.Vaidya., Characterization of Defects in Graphite Fiber-based Composites using the Acoustic Impact Technique., ASTM Journal of Testing & Evaluation, pp 390-405, September 1993.

U.K.Vaidya, P.K.Raju, and W.Kowbel., Material Damping Studies on Carbon-Carbon Composites., Carbon, Volume 30, Number 2, pp.925-929, October 1992.



Special Journal Issues and Edited Proceedings

Special Issue on Dynamic Response of Advanced Materials and Structures, Journal of  Composite Structures, Volume 67, Issue 3, March 2005, Edited by Serge Abrate and U.K.Vaidya.

Special Issue on Design and Manufacturing of Composites, Composite Structures, Volume 61, Issue 4, September 2003, Edited by Uday Vaidya and Julie Chen.

Special Issue of Transactions of ASME Journal of Engineering Materials and Technology, Published by The American Society of Mechanical Engineers, Volume 121, Number 4, October 2000, Special Issue on Durability and Damage Tolerance of Heterogeneous Materials, Edited by U.K.Vaidya and M. Pelegri.

NCA-Vol. 25, Proceedings of the ASME Noise Control and Acoustics Division, 1998, Vibroacoustic Characterization of Advanced Materials and Structures, Edited by U.K. Vaidya, V. Dayal and E. Ayorinde, ASME Press, N.Y. 10017, 1998.

NCA-Vol. 24, Proceedings of the ASME Noise Control and Acoustics Division; Vibroacoustic Methods in Processing and Characterization of Advanced Materials and Structures, Edited by V. Dayal, U.K.Vaidya and R. Mantena, ASME Press, New York, N.Y. 10017, 1997.