Changes to the Hazard Communication Standard
Notice: If you were assigned the Hazard Communication Course, read this
The Globally Harmonized System of Chemical Classification (GHS)
In March of 2012, the Occupational Safety and Health Administration (OSHA) updated the Hazard Communication Standard CFR29 1910.1200 (HazCom) to align with the Globally Harmonized System of Chemical Classification (GHS). Over the next three years, chemical manufacturers, distributors, employers and consumers will see changes in the way that chemical hazards are communicated on labels and safety documentation.
The intent of the new legislation is to make it easier for workers to understand chemical hazards, especially workers who may not speak or read English well, reduce confusion in the workplace, make safety training easier, and result in safer handling and use of chemicals. The new format will provide workers with quicker and more efficient access to information on the labels and safety data sheets. The changes will also save money for American businesses with productivity improvements projected because of fewer safety data sheet and label updates and simpler new hazard communication training. The new labeling system should also reduce trade barriers by coordinating with systems already in use in other countries.
What this means for employees at UAB
Since these major changes to labeling and safety information apply to all materials that have a chemical hazard, everyone employed by the University or the University Medical System will need to take the basic Hazard Communication training HS200 before the end of the year. Many job classifications may not work directly with hazardous chemicals, but since everyday materials such as paints drain cleaners and disinfectants will be relabeled using the new system, everyone needs to know how to recognize and use the new labels and information sheets.
- Manufacturers must now classify hazardous chemicals according to standardized international criteria.
- The detailed chemical information sheets are now called Safety Data Sheets instead of Material Safety Data Sheets and the layout of the information is always organized the same way.
- Pictograms will provide visual clues of the chemical hazards.
- Signal words: Danger and Warning will be used to describe how dangerous the material is.
Labels will all be organized the same way with the following standard components.
• The Product Identifier or material name
• Supplier Identification to let users know who manufactured or distributed the material
• Precautionary Statements that describe how to protect yourself from the dangers of the material
• Pictograms to provide a visual clue to the hazards.
• Signal Words that describe the relative hazard, just like on the safety data sheet
• Hazard Statements that describe the characteristic that makes the material dangerous
• Supplemental Information that may give contact information for getting additional information or contacting the manufacturer.
Safety Data Sheets will have 16 Required Elements all listed in the same order. In addition, the information in section 2 will include the same pictograms and warnings as the information on the label. Here are the required sections of the new safety data sheets.
Section 1, Identification
Section 2, Hazard(s) identification
Section 3, Composition/information on ingredients
Section 4, First-aid measures
Section 5, Fire-fighting measures
Section 6, Accidental release measures
Section 7, Handling and storage
Section 8, Exposure controls/personal protection
Section 9, Physical and chemical properties
Section 10, Stability and reactivity
Section 11, Toxicological information
Section 12, Ecological information
Section 13, Disposal considerations
Section 14, Transport information
Section 15, Regulatory information
Section 16, other information
Timeline for HazCom 2012
The chart below describes the dates for complying with the new standard.
|Effective Completion Date||Requirement(s)||Who|
|December 1, 2013||Train employees on the new label elements and SDS format.||Employers|
|June 1, 2015
December 1, 2015
|Comply with all modified provisions of this final rule, except:
Distributors may ship products labeled by manufacturers under the old system until December 1, 2015.
|Chemical manufacturers, importers, distributors and employers|
|June 1, 2016||Update alternative workplace labeling and hazard communication program as necessary, and provide additional employee training for newly identified physical or health hazards.||Employers|
|Transition Period||Comply with either 29 CFR 1910.1200 (this final standard), or the current standard, or both.||All chemical manufacturers, importers, distributors and employers|
For Additional Information
HAZCOM Course Assignments
HAZCOM Frequently Asked Questions
HS200: Hazardous Communication
The GHS "Purple Book" – in multiple languages.
GHS Pictograms UNECE
For information, please contact the OHS Chemical Safety program at 934-2487.
Chemical Inventory Management SystemThe Department of Occupational Health and Safety is starting the implementation of a campus-wide chemical inventory system to track hazardous chemicals. The system utilizes bar codes and features a web-based interface. This will allow researchers, laboratory staff and other chemical users to track chemicals on-hand, will aid OH&S with regulatory agency reporting, and will provide emergency responders with accurate information on the chemical hazards present within an area should an incident occur.
Most chemicals will need to be entered into the inventory, but the following types of materials will not:
- Bleach and consumer products such as cleaning agents
- Sugars and non-hazardous buffer salts
- Amino acids
- Materials of biological origin except for toxins
- Dilutions made by laboratory staff
- Culture media, agar and broth
- Latex paint
- Printer inks and toner
- Research samples
Preparing for the initial chemical inventory
OH&S staff will be conducting the initial chemical inventory in your lab.
- Discard all chemicals that are no longer useful to your research, expired (or more than 5 years old), or degraded – look for crystals, phase separation, container damage. Properly pack these chemicals and complete a Hazardous Waste Manifest to have them picked up.
- Ensure that any spills or other contamination are cleaned up properly – pay particular attention to cabinets and refrigerators.
- Check that chemicals in freezers are not frozen together or stuck to the sides or shelves.
- Ensure that materials to be inventoried are in their proper storage location.
- Ensure that chemicals have legible and appropriate labels – the ChemWatch system can be used to print a GHS compliant label if the original container label is damaged or inadequate. Structures and abbreviations of chemical names are not appropriate as the sole indicator of a chemical's identity.
- Place signs or communicate directly with the personnel who are conducting the inventory if there are sensitive or potentially hazardous procedures in progress.
- Ensure that there is a clean counter space for sorting and marking of chemical containers.
- Set aside a location for staging of containers that may need to be relabeled or packed as waste.
- Make sure aisles are clear and that there is good access to all chemical storage locations.
Chemicals need to be stored according to hazard class to prevent unwanted reactions in case of fire or other emergency. Flammable liquids in quantities greater than 10 gallons must be stored in flammable storage cabinets. Acids and bases must be stored separately and oxidizers need to be stored away from organic materials that could react to cause a fire. Here are some additional links to guidelines for proper chemical storage:
Making Sense Out of Chemical Storage
EPA Chemical Segregation Chart
[link to making sense of chemical storage safety short and EPA chemical segregation handout]
At the time of inventory:
• Tell the inventory staff if you would like specifically labeled sub-locations for your materials – OH&S only requires the building and room, but we can list by shelves, cabinets – etc.
• Chemical containers will be barcoded and returned to their original location after being entered into the Chemical Management System.
• Containers that are damaged, unlabeled, or expired will not be entered and will be moved to the designated location for disposal.
• Chemicals in locations that show signs of gross leakage or contamination will not be entered and the materials will be marked for disposal as waste.
• Most chemicals in their original containers will be inventoried. Buffers, dilutions and cleaning products will not be included in the inventory.
• You will be given a supply of preprinted barcode labels to use for chemicals purchased in the future. When you need additional labels contact OH&S at 934-2487.
During the initial inventory additional bar code labels will be distributed so that new materials can be added. For additional labels, please contact OH&S at 934-2487.
Instructions for using the inventory program are located here [link to inventory instructions].